Irregular angular shape
Fractured particle surfaces offer multiple potential cutting edges and interact with abrasive-tool matrices differently from regular blocky crystals.
SINODIAM INTERNATIONAL ยท INDUSTRIAL DIAMOND POWDERS
Angular crushed diamond abrasive for resin-bond grinding, edging and polishing tools.
Compare SND-G05 Economy Green, SND-G10 Standard Yellow and SND-G15 Premium Yellow according to particle morphology, grain behavior, mesh specification and tool formulation.
3 crushed grit grades ยท Angular particles ยท Resin-bond application focus

Representative crushed diamond particles ยท actual grade color and sizing vary
WHY SINODIAM / SERIES OVERVIEW
Compare SND-G05 Economy Green, SND-G10 Standard Yellow and SND-G15 Premium Yellow according to particle morphology, grain behavior, mesh specification and tool formulation.
Fractured particle surfaces offer multiple potential cutting edges and interact with abrasive-tool matrices differently from regular blocky crystals.
G05, G10 and G15 support initial economy-to-premium selection, not a guaranteed measured toughness ranking.
Use resin-bond grinding, edging and polishing as the first compatibility target; other systems require validation.
PRODUCT PORTFOLIO
Review each individual grade, its manufacturing application and relevant product-specific specifications before ordering.
PRODUCT 01 ยท COST-CONSCIOUS GRADE
Economy Green
Green, angular crushed synthetic diamond grit for suitable resin-bond grinding, edging and polishing.
Selection focus: Stone, ceramic edging, glass chamfering
80โ500 mesh confirmed offering
PRODUCT 02 ยท GENERAL STONE FINISHING
Standard Yellow
Yellow crushed RVD abrasive for general-purpose resin-bond stone grinding and polishing formulations.
Selection focus: Stone polishing pads and wheels
Confirm each available mesh
PRODUCT 03 ยท DEMANDING GRINDING EVALUATION
Premium Yellow
Premium-positioned yellow crushed abrasive for trials involving grain integrity and abrasive retention in more demanding tools.
Selection focus: Hard stone, carbide and selected ceramics
Confirm grade-specific comparative test data
TECHNICAL COMPARISON
Use this overview to shortlist a candidate material. Confirm actual batch data, particle-size specifications and the finished-tool process.
Color and grade designation do not certify toughness, bond adhesion or tool life. Resin-bond suitability is the primary direction; test other bonding systems individually.
INDUSTRIAL APPLICATIONS
The following are starting points for process evaluation, not guarantees of finished-tool performance.
Assess particle sharpness and wear in stone-processing resin tools.
Select particle size and exposure for controlled edge shaping.
Evaluate fine abrasive contact and edge damage in appropriate wheels.
Review harder workpieces and higher-load grinding with application trials.
APPLICATION SELECTION GUIDE
Choose by workpiece, processing method and material formulation. Validate promising candidates under operating conditions.
STEP 01
Record stone, ceramic, glass or other workpiece and its brittleness.
STEP 02
Clarify edge shaping, rough grinding, lapping or polishing.
STEP 03
Select G05, G10 or G15 by target tool economics and loading.
STEP 04
Specify the individual size fraction, grading basis and resin formulation.
STEP 05
Assess removal, finish, grain retention, fracture and finished-tool cost.
TECHNICAL FAQ
Practical questions about grades, manufacturing compatibility, specifications and technical inquiries.
Industrial synthetic diamond crushed into irregular or angular abrasive grains used in selected grinding, edging and polishing tools.
G05 is the green economy position, G10 the yellow standard position and G15 the yellow premium position; measured differences need grade-specific data.
The updated specification identifies synthetic diamond feedstock for SND-G05.
SND-G05 has a confirmed 80โ500 mesh offering; G10/G15 size lists require separate confirmation.
Some applications may be evaluated, but resin bond is the primary direction and plating compatibility must be tested.
Provide grade, mesh, workpiece, bond, tool type, estimated quantity and destination.
SINODIAM ยท TECHNICAL SUPPORT
Tell us your material grade or application, particle size, workpiece, bond or processing conditions, estimated quantity and destination country. SinoDiam can discuss available specifications and technical quotation options based on your requirements.
Request Technical Information & QuotationEmail: info@diamondmicron.com