SINODIAM INTERNATIONAL · INDUSTRIAL DIAMOND POWDERS

Metal Bond Diamond Powder

Synthetic diamond mesh grades for metal-bond grinding, shaping and precision toolmaking.

Compare SND-G20 through SND-G60 by crystal morphology, relative toughness and the requirements of your metal-bond matrix. Choose a grade using workpiece, mesh size, tool design and actual processing conditions.

4 metal-bond grades · MBD reference positions · Bond-aware selection

SinoDiam SND-G40 synthetic metal bond diamond grit in blue microscope field

Representative SND-G40 diamond grit · grade appearance and size vary

WHY SINODIAM / SERIES OVERVIEW

4 Products for Different Manufacturing Requirements

Compare SND-G20 through SND-G60 by crystal morphology, relative toughness and the requirements of your metal-bond matrix. Choose a grade using workpiece, mesh size, tool design and actual processing conditions.

Four toughness positions

SND-G20, G30, G40 and G60 offer medium-low through high relative toughness positions for different tool-formulation needs.

Mesh and crystal structure

Assess morphology, grain integrity and mesh size together with required removal rate and finished-surface objectives.

Metal-bond process fit

Matrix formulation, diamond concentration, manufacturing cycle and grain retention influence finished-tool performance.

PRODUCT PORTFOLIO

Explore Metal Bond Diamond Powder Products

Review each individual grade, its manufacturing application and relevant product-specific specifications before ordering.

PRODUCT 01 · MEDIUM-LOW TOUGHNESS

SND-G20

MBD4-Comparable

Mixed irregular and semi-blocky crystals; a candidate for selected non-ferrous and brittle nonmetal grinding tools.

Selection focus: Non-ferrous materials, glass and selected ceramics

80/100–325/400 mesh listed

Explore SND-G20 Details →

PRODUCT 02 · MEDIUM TOUGHNESS

SND-G30

MBD6-Comparable

Fine-size metal bond diamond grit for precision glass beveling and selected cemented-carbide grinding tools.

Selection focus: Glass beveling and carbide grinding

Individual mesh fractions by specification

Explore SND-G30 Details →

PRODUCT 03 · MEDIUM-HIGH TOUGHNESS

SND-G40

MBD8-Comparable

Relatively regular synthetic diamond crystals for glass drilling, pencil edging and controlled metal-bond abrasive shaping.

Selection focus: Glass drilling, edging and profiling

Confirm current mesh and particle grading

Explore SND-G40 Details →

PRODUCT 04 · HIGH TOUGHNESS

SND-G60

MBD10-Comparable

Predominantly cubo-octahedral diamond grit for evaluating durability in demanding metal-bond grinding and polishing.

Selection focus: Hard stone, ceramics, glass and crystal

Confirm size and toughness test conditions

Explore SND-G60 Details →

TECHNICAL COMPARISON

Product & Grade Comparison

Use this overview to shortlist a candidate material. Confirm actual batch data, particle-size specifications and the finished-tool process.

Product
MBD reference
Relative toughness
Selection focus
SND-G20
MBD4-comparable
Medium-low
Non-ferrous and brittle non-metals
SND-G30
MBD6-comparable
Medium
Glass beveling and carbide grinding
SND-G40
MBD8-comparable
Medium-high
Glass drilling and edge grinding
SND-G60
MBD10-comparable
High
Demanding grinding and polishing

MBD labels are commercial comparison references, not verified one-to-one equivalence. Tool suitability and any measured performance must be checked against grade-specific testing and the finished metal-bond formulation.

INDUSTRIAL APPLICATIONS

Recommended Applications

The following are starting points for process evaluation, not guarantees of finished-tool performance.

Glass beveling & edging

Evaluate grit selection for precision glass processing, including edge shaping and surface control.

Carbide tool grinding

Select metal-bond diamond grit according to wheel geometry, grain exposure and removal objectives.

Glass drilling & profiling

Compare grain toughness and retention for drilling, pencil edging and specialized abrasive-tool shapes.

Ceramic & hard material finishing

Review particle size and matrix wear for selected technical ceramics and other suitable brittle materials.

APPLICATION SELECTION GUIDE

How to Select the Right Product

Choose by workpiece, processing method and material formulation. Validate promising candidates under operating conditions.

STEP 01

Define the workpiece

Identify glass, carbide, ceramics, stone or appropriate non-ferrous substrates.

STEP 02

Select the operation

Clarify grinding, beveling, drilling, shaping or polishing and the required finish.

STEP 03

Review grade & mesh

Choose an initial toughness position and specify the relevant mesh fraction.

STEP 04

Check the matrix

Evaluate metal powder chemistry, diamond concentration, sintering cycle and retention.

STEP 05

Validate in finished tools

Compare performance, finish, tool wear and cost under actual operating conditions.

TECHNICAL FAQ

Frequently Asked Questions

Practical questions about grades, manufacturing compatibility, specifications and technical inquiries.

What is metal bond diamond powder?

Synthetic industrial diamond abrasive grains selected for grinding wheels and tools that retain diamonds in a metal matrix.

Are SND-G grades identical to MBD4–MBD10?

No direct equivalence is guaranteed. These are commercial reference classes; grade performance depends on morphology, grading, testing and tool formulation.

Which grade should I choose for glass or carbide?

SND-G30 is a starting candidate for selected glass beveling and carbide grinding; SND-G40 is considered for glass drilling and edging. Confirm against the specific process.

Does a higher-toughness grade always perform better?

No. Abrasive fracture, bond wear, grain exposure and the workpiece must be balanced for the finished tool.

What mesh sizes are available?

Availability depends on the grade and agreed grading specification. The SND-G20 listing spans 80/100–325/400 mesh; confirm other grades individually.

What does a quotation require?

Please send grade, mesh, workpiece, operation, tool or bond design, expected quantity and delivery country.

SINODIAM · TECHNICAL SUPPORT

Discuss Your Metal Bond Diamond Powder Requirements

Tell us your material grade or application, particle size, workpiece, bond or processing conditions, estimated quantity and destination country. SinoDiam can discuss available specifications and technical quotation options based on your requirements.

Request Technical Information & Quotation

Email: info@diamondmicron.com

Scroll to Top