MATERIAL FAMILY 01
CBN Abrasive Grit
CBN-A10 / A20 / B10 / B20
Individual cubic boron nitride grains for resin, vitrified, metal and electroplated grinding tools. Selection involves crystal morphology, friability, bond and grinding load.
SINODIAM ยท ADVANCED SUPERABRASIVES
CBN, PCD, PCBN and PDC Are Different Tool Material Systems
Choose advanced superabrasives by workpiece, operation and tool architecture. Compare loose CBN abrasive grit, polycrystalline diamond (PCD) tool blanks, polycrystalline CBN (PCBN) cutting materials and PDC composite cutting elements.
CBN abrasive grit ยท PCD / PCBN tool blanks ยท PDC cutters

Representative PDC cutting elements; CBN, PCD and PCBN are distinct material systems.
Product Overview
Choose advanced superabrasives by workpiece, operation and tool architecture. Compare loose CBN abrasive grit, polycrystalline diamond (PCD) tool blanks, polycrystalline CBN (PCBN) cutting materials and PDC composite cutting elements.
CBN grit is a particulate abrasive; PCD and PCBN are consolidated cutting materials.
PCD suits selected non-ferrous and abrasive materials; PCBN is commonly evaluated for hard ferrous materials.
PDC cutters combine a diamond cutting table with a supporting substrate for application-specific tool designs.
Product Portfolio
Choose the family first, then open its dedicated landing or product page for grade details, current specifications and technical guidance.

MATERIAL FAMILY 01
CBN-A10 / A20 / B10 / B20
Individual cubic boron nitride grains for resin, vitrified, metal and electroplated grinding tools. Selection involves crystal morphology, friability, bond and grinding load.

MATERIAL FAMILY 02
Diamond cutting-material blanks
Polycrystalline diamond cutting blanks for precision machining of selected aluminum, copper, graphite and abrasive composites. Consider grain structure, substrate and cutting geometry.

MATERIAL FAMILY 03
Consolidated CBN cutting material
PCBN tool blanks for appropriate hardened steel, cast iron and other ferrous precision-machining applications. Evaluate cutting regime, CBN content, tool edge and grade.

MATERIAL FAMILY 04
Oil & gas / geology & mining / milling
Diamond-table cutting elements joined to carbide substrates for drilling, geological and selected specialized milling tool designs. Cutter geometry and impact-abrasion balance matter.
Technical Comparison
Use this summary to shortlist a starting material option. Product-specific details and testing requirements remain important.
SND-M/PCD micron diamond powder is a feedstock for selected polycrystalline material manufacturing, not a finished PCD blank or PDC cutter. Different CBN and PCBN forms are not substitutes.
Industrial Applications
Application examples support initial selection; actual suitability depends on the tool, workpiece and process conditions.
Select CBN abrasive grit with appropriate bond, mesh size and grinding regime.
Select PCD blanks for suitable aluminum, copper, graphite or abrasive composites.
Evaluate PCBN tools by workpiece hardness and cutting parameters.
Match PDC cutters to formation, tool geometry, abrasion and impact.
Consider specific PDC cutter shapes and mechanical support for target rock conditions.
Application Selection Guide
Five steps to translate a process requirement into a product discussion.
STEP 01
Describe ferrous grade, non-ferrous alloy, composite, graphite or rock formation.
STEP 02
Grinding, turning, drilling, specialized milling or other tool manufacture.
STEP 03
CBN grit, PCD blank, PCBN blank or PDC composite cutter.
STEP 04
Mesh and bond, tool blank dimensions or PDC cutter size and design.
STEP 05
Review performance under application loads and request appropriate specification evidence.
Technical FAQ
Technical information for buyers and tool manufacturers.
No. CBN grit is a particulate abrasive for grinding tools; PCBN is a consolidated cutting-material blank for suitable machining.
PCD is primarily considered for selected non-ferrous, graphite and abrasive composite cutting. PCBN may be a more relevant choice for certain hard ferrous machining tasks.
PDC is a polycrystalline diamond cutting table attached to a supporting substrate, typically carbide, for application-specific cutting tools.
No. Manufacturing feedstock is not the same as a finished polycrystalline tool blank or cutter.
A10, A20, B10 and B20 are the four core grade families; request the applicable mesh size and current specification.
Provide workpiece, operation, product form, bond or geometry, dimensions, expected quantity, delivery country and test needs.
SINODIAM ยท TECHNICAL SUPPORT
Share your intended workpiece or application, material type, grade or particle size, tooling or process requirements, estimated volume, delivery destination and necessary documentation. SinoDiam can discuss relevant specification and quotation options.
Request Technical Information & QuotationEmail: info@diamondmicron.com