Wholesale Superabrasive Diamond Powder - FCZ925 Per Alloyed Metal Powder Used For Granite Muti Cutting Blades – SinoDiam

FCZ925 Per Alloyed Metal Powder Used For Granite Muti Cutting Blades

1. What is Pre-alloyed Powder

Pre-alloyed powders are harder, less compressible and hence require higher pressing loads to produce high density compacts. However, they are capable of producing high strength sintered materials. Pre-alloying is also used when the production of a homogeneous material from elemental powders requires very high temperatures and long sintering times. The best examples are the stainless steels, whose chromium and nickel contents have to be pre-alloyed to allow economic production by powder metallurgy.

2. The Parameters of FCZ925

	Main Element	Fe, Cu, Zn
	Theoretical Density	8.01g/cm³
	Sintering Temperature	830℃
	Bending Strength	1200Mpa
	Hardness	98-102HRB

3. FCZ925 Pre-alloyed Powder Character

• This FCZ925 pre alloyed powder has a good wetting and holding ability to the diamond, low bulk density, easy cold forming and great sharpness.
• Applied to medium diameter granite saw blade, granite muti cutting blades, segments for graite blade.

4. Usage Instruction for Granite Muti Cutting Blade

1. Metal Powder

• 50-70% FCZ925
• + 10-20% Cu
• + 1-3% Sn
• +5-10% Zn
• + Fe for balance

B. Diamond

• 35/40 @ 30%
• 40/45 @ 50%
• 45/50 @20%
• Diamond Concentration @ 30-35%

C. Sintering Temperature  790-810℃